Tips to Prevent Slip and Fall Claims

Every year, approximately 8.9 million people visit the emergency room because of the slip and fall. They are the second largest cause of injury at and away from work as well. Moisture on the floor around the business place is the main cause of slip and fall claims. You can’t control the weather or such uncontrollable aspects, but we can control our inclement conditions.

As a matter of fact, just above 700 people died from slip and fall in 2016. Therefore, it is essential that workers must follow the rules and regulations to prevent injuries from slip and fall. There is a very thin line that separates slip, trip, and falls. Victims of slip and fall accidents should seek the help of a slip and fall attorney in Los Angeles to file claims.

Causes of slip

A slip happens when there is a lack of friction between your shoes and the floor. Slips mainly happen because of wet floors, oil spills, flooring with less traction, and loose mats. Slips and other related accidents account for the majority of injury claims in the workplace.

Causes of trip

A trip occurs when something hinders the movement of your feet, causing you to fall. Trips mainly happen because of uncovered cables, bad lighting in walkways, wrinkled carpets, and cluttered passages and so on.

Causes of falls

Fall accidents can happen in all business places. The main causes of falls are unprotected edges, unsafely positioned ladders, unstable working surfaces, slippery floors, and more.

It is advised that workers adopt a steady pace of walking when they believe that the surface has less friction. Also, on slippery surfaces, it is recommended to walk with toes pointed outward and reduce walking speed around corners. It is the duty of the employer to install handrails on all staircases. Here are some simple steps to reduce slip and fall claims in the business place:

  • Provide walk-off mats inside entry areas at least 10 – 15 feet in length. Mats are needed to be at least as wide as the doorway into the buildings.
  • Drain water away from outside doorways, parking lots, and walking paths.
  • Train employees to help identify and address the most common slip and fall hazards.
  • Spills should be cleaned immediately. If there is no one to clean it, apply the wet floor sign around it so that workers can move around them.
  • All walkways, passages, and premises must not have debris and obstacles at any point.
  • No cables and wires should be left open on the floor. Either they should be covered with a floor mat or tucked in the corners so that it doesn’t hinder the movement of workers.
  • Close drawers and cabinets when not in use.
  • Promptly replace worn out light bulbs that light up the walkways and passages.
  • Don’t install slippery walking surfaces in the first place. Consider floorings that have enough traction.
  • All employees should wear comfortable shoes with high traction in the workplace.
  • Implementing a slip and fall prevention program in the business place can help reduce the risk of an injury keeping your staff safer.
  • Periodically inspect the condition of your walkways or steps and correct the potential slip and fall hazards in time.

Leave a Reply

Your email address will not be published. Required fields are marked *

Back To Top